BENZ TEMPERATURE RETRACTION TESTER MEASURES EFFECTS OF TEMPERATURE ON RUBBER AND PLASTIC The Benz TR 2200 temperature retraction tester measures the effects of low temperature on rubber, plastic and other elastomeric materials.
PROVIDENCE, RI - The Benz TR 2200 temperature retraction tester measures the effects of low temperature on rubber, plastic and other elastomeric materials.
Meeting and exceeding ISO 2921 and ASTM D-1329, the TR 2200 allows the accurate evaluation of crystallization and the comparison of rubber and rubber-like sample viscosity at low temperatures.
An operator stretches a sample, often to 50%, 100%, 150% or 200% of the original length, cools it in a bath solution like methanol or silicone grease, then releases the sample and allows it to retract.
Windows-compatible Benzwin software, supplied free with the TR tester, allows retraction point calculation and comparison. Readings are presented real-time and saved.
A single sample can be analyzed in different conditions, and different samples can be compared.
The Benz TR 2200 reports an elastomer low limit operating temperature. It also details a samples percentage of retraction at different temperatures. And it allows the determination of a temperature range in which a sample is elastic.
The Benz TR 2200 is often used with a Benz BPT 2100, a high accuracy brittlepoint tester, to gauge a materials suitability for low temperature use.
A special attribute of the Benz TR 2200 is its ability to be programmed so that the operator can select not only temperature retraction points but the end point of testing, shortening testing time.
A standard feature, not an option, is liquid nitrogen control, which results in highly accurate controlled temperatures and reduces operator intervention.
Sample lengths changes are determined to an accuracy of ±0.001 inches.
The TR 2200Õs unique sample holder reduces temperature deviation when a sample is immersed in its bath.
Attractively constructed of hard-coated anodized aluminum and stainless steel, the Benz TR 2200 carries an extensive one-year parts and labor warranty.
It operates at 110/220 volts, 1 amp AC power and needs only 3 square feet of counter space.
It is available directly from the manufacturer, Benz Materials Testing Instruments, 73 Maplehurst Ave., Providence, Rhode Island 02908. Phone 401.331.5650, fax 401.331.5685 or email firstname.lastname@example.org.